Three major issues in the use of plumbing and geothermal floor

Today, more and more families choose to install plumbing and geothermal floor during renovation. However, due to the higher maintenance requirements of plumbing and geothermal floor, consumers must pay more attention to details when paving and using, especially in central heating. In the beginning of this week, it is even more important to pay attention to the geothermal floor debugging in the home.

600){this.width=600}” align=center src=”/userfiles/20170802170116781.jpg”>

The first use of heating is to be progressive

For the first time using geothermal heating, attention should be paid to slow heating. For the first time, the first three days of heating should be gradually warmed up: the first day water temperature is 18 °C, the next day is 25 °C, the third day is 30 °C, fourth. The genius can rise to the normal temperature, that is, the water temperature is 45 ° C, the surface temperature is 28 ° C ~ 30 ° C. Can not heat up too fast, too fast, the floor may be cracked and twisted due to expansion. When the geothermal heating system is activated again after a long time, It should be heated as strictly as the first time.

Avoid dryness and monitor the indoor humidity

The winter climate is dry, plus the use of geothermal heating, the floor is in high temperature for a long time. In the case of easy cracking, the owner must humidify the room to avoid dry deformation of the floor. When decorating, be careful not to punch holes and nails on the ground to avoid leaking the geothermal pipeline, causing the geothermal system to run water and the floor to be scrapped. The surface temperature is relatively high, the room is best not to Directly place the glassware and porcelain in the water to avoid the unevenness of heat, which leads to the ‘water flooding mountain’ in the home.

The ground temperature should not be too high during use

, using geothermal heating, the surface temperature should not exceed 28 ° C, the water pipe temperature can not exceed 45 ° C, if this temperature is exceeded, it will affect the service life and life cycle of the floor. The average family, the room temperature in winter reaches 22 ° C or so, it is already very Comfortable, normal heating will not affect the use of geothermal floor.

Nowadays, more and more homes are installing plumbing and geothermal floor, but there are few shortages of precautions for use. I have hoped to help you with this knowledge.

Relevant recommended products

Ceramic Fiber Board HA &HZ

fully automatic HDPE blown film machine

Compact Board Compact Laminate High Pressure Laminate

Decorative PVC Crust Foam Sheet/Foam Board New High Quality PVC Material Foam Board/ PVC Sheets

Latest China-Made PPR Equal Tee for Water Supply with Durable Quality

Leave a Reply

Your email address will not be published. Required fields are marked *