The most common 8 kinds of floor tiles on the market, get to know

The floor tiles are a kind of decoration that many people pay attention to. After all, the floor tiles are chosen, and your home decoration is half successful. However, in the investigation, it was found that there are very few people who can really buy the floor tiles for the floor tiles, and most of them buy the wrong stickers, which is a pity. So how to choose the floor tiles is the most correct? Xiaobian lists the most common 8 kinds of floor tiles on the market, and talks about the difference between them.

The floor tiles are made of clay and can be divided into materials according to the material:

1, glazed tile:

The glazed brick is the surface of the brick that has been glazed brick. Glazed tiles are divided into ceramic glazed tiles and porcelain glazed tiles according to raw materials. According to the gloss, it is divided into matt and bright.

Pros and cons:

Generally speaking, glazed tiles are rich in color and pattern, and have strong anti-fouling function.

But because the surface of the glazed tile is glaze, the wear resistance is not so good.


Glazed tiles are generally suitable for bathrooms, balconies, etc. In addition, bright glazed tiles are suitable for the kitchen.

2, whole body brick (also called non-slip brick)

The whole body brick is The surface is not glazed, and the material and color of the front and back are the same (so called the whole brick, the whole body!)

Pros and cons:

The whole body brick is more wear-resistant and the anti-slip performance is better.

But the colors and colors are more general.


It is widely used in halls, aisles and outdoor walkways, and is generally used less on walls.

3, porcelain tile

natural stone crushed and chemically bonded The agent is pressed and then calcined at a high temperature.

Pros and cons:

High flexural strength, abrasion resistance, acid and alkali resistance, no discoloration, and long life. Freezing and thawing at -15 ° C – 20 ° C, cycling 20 times is no problem (the millennium old demon is simply!). But color and color, you don’t ask so much. Moreover, the porcelain tiles themselves are very rough.


Exterior. It is specially used for wind, frost and rain.

4, parquet

is to cut the fired tiles After assembling, the tiles are assembled into various patterns to serve as a decorative effect.

Benefits and disadvantages:

More patterns and colors.

But the price is expensive and expensive.


Some places that require special decoration, such as entrance porch. (However, for local tyrants, you can use anywhere, as long as you like!)

5, polished tiles:

Polished tiles are bricks that have been polished and polished.

Pros and cons:

The polished brick surface is much cleaner than the whole brick. This brick is very hard and very wear resistant. If you use the oozing technique, the polished tiles can make a variety of imitation stone and wood-like effects.

The polished brick is not resistant to dirt, non-slip, and the colored liquid is easy to penetrate and cause discoloration of the brick surface.


In addition to the bathroom and kitchen, most of the indoor space can be used.

6, vitrified brick:

The vitrified brick is made of quartz sand The mud is fired in a certain proportion, then polished and polished but does not need to be polished. The surface is as smooth and translucent as the glass mirror, which is the hardest of all the tiles.

Pros and cons:

Water absorption, edge straightness, flexural strength, acid and alkali resistance are superior to ordinary glazed tiles, polished tiles and General marble.

But the vitrified brick is not perfect. Its defect is that after the grinding, the pores are exposed, and dust, oil and the like are easily infiltrated.


Glass tiles are suitable for living rooms, bedrooms, walkways, etc.

7, Mosaic:

The mosaic is also called paper brick. A small piece of tile used to form a variety of decorative patterns on the building (feelingIt’s a bit like a mosaic, except that the mosaic is a whole, and the mosaic is a small piece and a whole.)

Pros and cons:

There are many kinds of colors, and the decoration is very strong. Basically, it can be described by high-end atmosphere.

But the mosaic has a fatal flaw that is not resistant to dirt. In addition, the price is also a little expensive.


Mainly used for paving or interior wall decoration, or for exterior wall finishes.

8, antique brick:

Antique bricks belong to ordinary tiles, and porcelain The film is basically the same, the only difference is that during the firing process, the antique bricks are imitated in the old style, which is essentially a glazed porcelain brick, which attracts people’s attention with the unique charm of the classic. The vicissitudes of the years and the heavy history, the antique bricks create a nostalgic atmosphere through style, color and pattern.

Pros and cons:

There is a thick layer of glaze on the surface of the antique brick, which has good antifouling ability; good retro style, no loss of fashion; texture design Good, generally not outdated; small size, can do a variety of modeling on the effect of making a mosaic or paving effect; good slip resistance; rich colors.

Because the surface of the antique brick is a layer of glazed surface, it is not easy to do chamfering, edging and other deep processing, the hardness is lower, the water absorption rate is higher, and the brightness is not high.


The living room floor, kitchen, bedroom, balcony, etc. can be laid, and the wall can be considered.


Relevant recommended products

Steel Plate Grade 300 Series High Quality Made in China

Mono Solar panel 60~65W,Solar energy,Solar system

Cryogenic Fiberglass Insulation Paper with Aluminium

Household Aluminum Foil For Food Packing

Cold Rolled Ribbed Bars 6mm 8mm 10mm 12mm

Leave a Reply

Your email address will not be published. Required fields are marked *